1 – 2/0 AWG Marine Type Boot

[pdf] [/pdf]
1 – 2/0 AWG Marine Type Boot

Also Known As:

Marine Type Boot, Heavy Duty PVC, Polyvinyl Chloride, Boot Terminals

About:

Protecting battery connections is as important as protecting the battery itself. When damage occurs to the battery connections, it can cause all sorts of issues. Damage can be physical impact or even corrosion due to exposure. Is there a way to protect your connections Yes, and it’s easier than you think. Marine type battery boots prevent shocks, shorts, and corrosion. This boot is typically used in marine applications to cover secondary power or grounds. Marine type boots offer protection for continuously energized parts. To use, disconnect the point you would like to cover. Next, slide the marine type boot over the existing cable and connection point. After you reconnect the cable, pull the marine type boot into place. Make sure to cover the connection point completely.

Construction:

Meets UL 94 V2 Rated 105 C
Meets Coast Guard 33 CFR Part 183 Subpart 1
Meets S.A.E. J378 and J1128 (low voltage caps)

Features:

Polyvinyl chloride 105C
Recommended per ABYC E-10.6(1)
Helps prevent electrical shorts and shock

Applications;

Protects against corrosion and shorting
Covers a power or ground on an alternator or starter

Specifications:

Boot Style:Marine Style
Material : Heavy Duty PVC
Part Number: TBCM20