10 – 6 AWG Alternator Type Boot

[pdf] [/pdf]
10 – 6 AWG Alternator Type Boot

Also Known As:

Alternator Type Boot, Heavy Duty PVC, Polyvinyl Chloride, Boot Terminals

About:

Protecting your battery connections is just as important as protecting your battery. If damage occurs to the battery connections, it can lead to all sorts of issues. Damage can be either physical impact or corrosion due to exposure. Is there a way to protect your battery connections Yes, there is, and it’s easier than you think. Alternator style battery boots prevent shocks, shorts, and corrosion. This style boot is typically used to cover a ring terminal or lug on an alternator or starter. Alternator type boots offer protection for continuously energized parts. Most commonly this will include the positive battery terminal. Alternator type boots can also be used on both ends of wires connected to continuously energized sources. To use, disconnect the point you would like to cover. Next, slide the alternator type boot over the existing cable and lug. After you reconnect the cable, pull the alternator type boot into place making sure to cover the connection point.

Construction:

Meets UL 94 V2 Rated 105 C
Meets Coast Guard 33 CFR Part 183 Subpart 1
Meets S.A.E. J378 and J1128 (low voltage caps)

Features:

Polyvinyl chloride 105C
Recommended per ABYC E-10.6(1)
Helps prevent electrical shorts and shock

Applications;

Protects against corrosion and shorting
Covers a power or ground on an alternator or starter

Specifications:

Boot Style: Alternator Style
Material :131 Contact Copper
Finish: Electro-plated, Bright Tin
Part Number: TBCA6