Okoguard Stranded Uncoated Copper Shield Okoclear-TS MV-105 15KV Power Cable

[pdf] [/pdf]

About:

This cable features stranded uncoated copper conductors, providing excellent flexibility and conductivity. It is equipped with Okonites proprietary Okoguard insulation system, which is an ethylene-propylene rubber (EPR) based compound known for its excellent electrical properties and resistance to moisture and heat. The Okoclear-TS jacket is a thermosetting, semi-conducting material that provides additional electrical insulation and mechanical protection. The “MV-105” designation indicates that the cable is rated for medium voltage applications up to 15,000 volts and is designed for continuous operation at a maximum conductor temperature of 105C.

Also Known As:

15KV EPR Insulated Power Cable
Okonite MV-105 Cable
Okoguard 15KV Cable
Stranded Copper MV Power Cable

Applications:

Okoguard shielded Okoclear-TS Type MV-105 power cables are recommended for use as feeder circuits, in electric utility generating stations, for distribution circuits, and for feeders or branch circuits in industrial and commercial installations, where a cable with low smoke/zero halogen characteristics is needed.
Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed
to sunlight), in any raceway or underground duct, directly buried if installed in a system
with a grounding conductor in close proximity that conforms with NEC Section 315.36 and 250.4(A)(5), or messenger supported in industrial establishments and electric utilities.
May be installed in cable trays where permitted by NEC Section 392 as permitted by NEC Section 315.32(3).

Standards:

UL 1072 (Standard for Medium Voltage Power Cables) for safe use in electrical distribution and transmission
ICEA S-93-639/NEMA WC 74 (Standard for Shielded Power Cables for Use in the Transmission and Distribution of Electric Energy)
IEEE 1202 (Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies) for fire resistance
AEIC CS8 (Specification for Extruded Dielectric Shielded Power Cables Rated 5 through 46 kV)

Construction:

Conductor: Uncoated copper compact stranded per ASTM B-496.
Strand Screen: Extruded semiconducting EPR strand screen. Meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 & S-97-682, AEIC CS8, CSA C68.10 and UL 1072.
Insulation: Meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 & S-97-682, AEIC CS8, CSA C68.10 and UL 1072.
Insulation Screen: Extruded semiconduction EPR insulation screen. Meets or exceeds electrical and physical requirements of ICEAS-93-639/NEMA WC74 & S-97-682, AEIC CS8, CSA C68.10 and UL 1072.
Shield: 5 mil bare copper tape helically applied, with 25% minimum overlap.
Jacket: Meets or exceeds electrical and physical requirements of ICEA S-93-639 and CSA C68.10 for Type II crosslinked polyolefin jackets.
UL listed as Type MV-105, sunlight resistant and for use in cable tray in
accordance with UL 1072.
CSA C68.10 listed as FT4-ST1, HALOGEN-FREE, LTDD (-25C), and TC-ER

Features:

Low smoke/zero halogen jacket.
Okoguard cables meet or exceed all recognized industry standards (UL, NEMA/ICEA and IEEE).
Triple tandem extruded, all EPR system.
105C continuous operating temperature.
140C emergency rating.
250C short circuit rating
Excellent corona resistance.
Exceptional resistance to treeing.
Screens are clean stripping.
Exceptional resistance to moisture.
Resistant to most oils, acids, and alkalis.
UL listed: MV-105, Sunlight Resistant, Cable Tray Use, and Oil Res I & II.
Passes the UL & IEEE 383-1974 and FT4/IEEE 1202 Vertical Tray Flame Test.